2007-03-24 20:07:31 · 3 answers · asked by johnny g89 1 in Cars & Transportation ➔ Car Makes ➔ Honda
you have to determin what kind of boost set-up you will be running in, then you will know it..and it depends on your ECU too.. if you using piggyback unit, the fuel map site maybe not enough to control your fueling.. @ if your motor is 1700liter u might using quite smaller turbine wich is good for acceleration.. ur stock injector maybe around 425cc or 431cc.. if your using piggyback ECU.. max mapping point is about (+/-)25 sites or perhaps +/-50 sites.. then using a 450cc or 500cc is just good enough with no idle problem..
the thing is LARGER injector maybe good at full throttle position.. but when idling or low cruising speed it will make your car hard to drive.. and with a race clutch in the tranny it would be useless to drive it slo ( or cannot at all)..
and when talking bout injectors.. Make sure to use hi power pump (bosch 440) is good..but noisy.. and the fuel regulator is adjustable type..
2007-03-25 00:57:00 · answer #1 · answered by theblues79 3 · 0⤊ 0⤋
D17a2 Turbo Kit
2016-11-15 00:21:45 · answer #2 · answered by mcveay 4 · 0⤊ 0⤋
YEAH go to the "store" and get in the zone
2007-03-24 21:33:52 · answer #3 · answered by U DUMBASS MUTHA F*CKAS 1 · 0⤊ 0⤋