try
http://www.computerforensicalliance.com/.
based near london
probably not likely to be cheap
why not try to buy another drive of the same spec and bastardise it
2007-03-24 06:14:01
·
answer #1
·
answered by imaginarynumber 5
·
0⤊
1⤋
No, I have no recommendations, but if I tried everything and had to get the data, I'd probably contact Seagate.
But first, before you go off the deep end, what symptoms does your friend's failed drive have? Has he/she tried assigning the drive as a slave and reading the disk that way? Does Windows Explorer recognize the drive? Has he/she tried command line?
Having worked on pcs since they arrived in the 80's, a statement like "drive failed" or "quit suddenly" just doesn't really describe what really happened. And your belief that the motor or electronics have failed is very possible, but I think quite unlikely since all the hard drives I've seen don't have any loose wires to break. In fact, I've never seen a drive just die.
I have seen drives have their boot sectors corrupted where you can't get it to boot up or even be recognized, but I've been able to salvage the data.
Good Luck
2007-03-24 06:18:53
·
answer #2
·
answered by snvffy 7
·
0⤊
1⤋
I had an identical form of concern yet my computing gadget grew to become into took over with the help of 'a blue demonstrate screen of dying' ive examine peoples suggestion and it got here an extremely huge help to me - my suggestion might the two be - did a restoration disk come including your computing gadget ? ive additionally heared which you would be able to get a sparkling disk what you may positioned into your disk stress and positioned all your documents and issues onto that - then while all your documents does flow you may purely positioned that disk in and positioned all your substantial documents onto your computing gadget back. in case you cant get on the computing gadget - flow directly to 'secure mode' and do the 'sparkling disk restoration' - regrettably on the time i didnt have a sparkling disk or a restoration disk so i had to press 'ctrl and f11' and have been given rid of each little thing on it - so it grew to become into as though i purely bought it and set it up - sorry if this isnt somewhat what you meant or expected - i used to be hoping this might have helped you in some way :)
2016-10-20 08:30:56
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
If the hard drive completely failed, then you will need a company that will install the platters to another hard drive. That will be very expensive.
This company will give you a free estimate, and has been around for a while. Make sure you tell them that the hard drive has completely failed and not just crashed.
http://www.drivecrash.com/
Phone: 800-233-3648
2007-03-24 06:15:59
·
answer #4
·
answered by Anonymous
·
0⤊
1⤋
Data Rescue
2007-03-24 06:13:44
·
answer #5
·
answered by Anonymous
·
0⤊
1⤋
Couple of choices to do this one.
Pay a fee for it to recover from the professonial which it is not cheap.
Put the harddrive in the bag in put in the frezeer for an hour and take it out and it good for one shot to get the data out and if it fail.
If you dont want do both then you are screw
2007-03-24 06:13:04
·
answer #6
·
answered by Cyber Superman (Man of Steel) 5
·
0⤊
1⤋
Look for a PC repair company in your area. Most PC repair shops will have data recovery tools available. Call around and see what they can do.
2007-03-24 06:16:10
·
answer #7
·
answered by selfrob 4
·
1⤊
1⤋
One well known and professional company is Ontrack but they're expensive to use but good they'll get you pictures back, look at there site here http://www.ontrack.com/
2007-03-24 06:14:54
·
answer #8
·
answered by Anonymous
·
0⤊
1⤋