how much oil do i need 2 put in when i do a oil change on my Honda xlr 125r x reg can any1 help me
2007-03-24 03:59:19 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
look in your manual, or find a manual online.
on average though, it would be around 800ml to 1ltr.
dont take my word for it though...
and use good oil!
2007-03-24 04:02:33 · answer #1 · answered by ribena_wrath 3 · 1⤊ 0⤋
If you are not sure how much oil to put into the sump do the following:
1) Make sure the bike is on level ground
2) Add 1/2 a pint of oil
3) Insert dip stick but dont screw it in
4) Repete this process till the oil level reaches the top line/mark on the dipstick
5) When you get to the line/mark you can now screw in the dip stick fully Run engine for 2 minutes or take for a short run say around 2 to 3 miles
6) Place bike back on level ground Remove the dip stick and wipe clean Wait a few minutes and then insert it back remembering not to screw it down Remove it and check the oil is still the line/mark if so screw the dip stick back in fully
2007-03-26 04:23:46 · answer #2 · answered by alan b 1 · 0⤊ 0⤋
Yep, Read the stick altho Hondas can be alittle tricky about threading the stick in or not to read them...If you dont have a manual just look for sites online, I'm sure there's one somewhere for your bike.
2007-03-25 03:37:10 · answer #3 · answered by JusPeachy 3 · 0⤊ 0⤋
When it gets to the correct level on the dipstick - add a little at time until it gets to the level - start it up and let it run for a minute then recheck level
2007-03-24 11:03:04 · answer #4 · answered by jamand 7 · 2⤊ 0⤋
Call your local Honda dealer and they will have the answer.
2007-03-24 11:07:54 · answer #5 · answered by Mark G 2 · 1⤊ 0⤋
probably around 1700ml but check with your dealer first, or manual.
2007-03-24 11:28:34 · answer #6 · answered by Anonymous · 0⤊ 0⤋