hi , i have a rumbling noise everytime i go over little bumps, it sounds like the ball joint noise. but i have changed the,
arm with the ball joint and the 2 bushes in, and also changed the drop link bar on the strut , any ideas thanx.its not the wheel bearing either.
2007-03-24 02:12:05 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
could be the track rod ends.
2007-03-24 02:16:34 · answer #1 · answered by alec A 3 · 0⤊ 0⤋
first, ball joints dont rumble, they clunk... its what hold the wheels upright... and at a specific angle to the road...
check your suspension top bushes where it goes thru the wing... are you sure its not just roadnoise... coz the only other thing it can be is the wheelbearing... and the TRE only control the steering... left and right... up and down movement is controlled by the dampers and coil spring... which may be cracked... jack it up and look...
and stop hitting speed humps at 40mph...
(logic) what goes up and down? the suspension strut... all other parts rotate...
2007-03-24 02:24:55 · answer #2 · answered by Anonymous · 0⤊ 0⤋
There could be a number of things, Anti roll bar bushes, links, strut mounts, broken coil spring could even be the damp shocker.
2007-03-27 10:40:31 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Check driveshafts joints, how is the car when driving on a normally good road?
2007-03-24 09:17:58 · answer #4 · answered by DIAMOND_GEEZER_56 4 · 0⤊ 0⤋
have you tryed the cradle under neath that holds the spare wheel
2007-03-24 02:30:15 · answer #5 · answered by michelefaeglesga 1 · 0⤊ 0⤋
anti roll bar bushes, or top suspension mounts.
2007-03-24 06:44:08 · answer #6 · answered by chunky 5 · 0⤊ 0⤋
cv boot?
2007-03-24 21:13:20 · answer #7 · answered by placidma 3 · 0⤊ 1⤋