2007-03-23 12:23:17 · 3 answers · asked by gus0732 1 in Cars & Transportation ➔ Maintenance & Repairs
On pre-emissions controlled vehicles, there are two of them. One on the right and one on the left, almost at the bottom of the carb towards the front of the motor. If they are not there, then it is not adjustable.
If you have a non-adjustable carb, you can have it rebuilt to add them. Contact Pony Carburetors.
http://www.ponycarburetors.com/default.asp
Or you could just go with a new carb from JET Performance. These guys really know their Q-jets.
http://www.jetchip.com/products.asp?pid=23033
2007-03-23 12:37:59 · answer #1 · answered by Doug K 5 · 0⤊ 0⤋
Hi : There is no bolt to adjust the fuel on a quardrajet carb only air mixture screws located in the base plate of the carb. They may be covered with black plastic seals and have a limited movement.This is a factory adjustment and they don't want you to adjust them, but these caps can be removed to adjust card if you want then replaced. Good Luck hope this helps.
2007-03-23 19:37:16 · answer #2 · answered by johnnybegood 3 · 0⤊ 0⤋
hope this will help
2007-03-23 19:33:52 · answer #3 · answered by Joseph 2 · 0⤊ 0⤋