The shaking becomes less as i increse speed and its seems to be geting worse as time goes on
2007-03-23 10:07:44 · 7 answers · asked by lmonaco432 1 in Cars & Transportation ➔ Maintenance & Repairs
Your tie rod ends have probably gone bad and messed your tires up. Have the front end checked.
If you have recently put on new tires, one of them is probably bad. Rotate them till it stops.
2007-03-23 10:11:16 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Jeremy i think of you have a pair of issues going here. however the 1st and maximum severe element you're able to do is to retrieve the Diagnostic hardship Codes. this might direct your seek for a reason. you need to use the "flash" technique of retrieving the codes or you may ask a provider branch to study them for you with a scanner or code reader. There might ge of venture that a coupon aspects keep might study them for you in the event that they have between the older type code readers. many of the shops have code readers for 1996 and later. call around and tell them what 12 months and make you have and that they are going to enable you comprehend in the event that they are able to study the codes or not. as quickly as you % out the circuits or aspects responsible for the codes, carry out suited DIAGNOSTICS. do not anticipate that changing an element will scientific care the challenge.
2016-12-19 12:32:34 · answer #2 · answered by Anonymous · 0⤊ 0⤋
may have a bad tire. could be a balance issue or something worn out in the front end like a tie rod end
2007-03-23 10:12:45 · answer #3 · answered by itsthewill 6 · 0⤊ 0⤋
Sounds like a wheel is out of balance or you have an axle bearing trying to lock up.Have it looked at NOW!
2007-03-23 10:11:50 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Could be cv axle/joint, wheels need to be balanced or you could need to turn your rotters. Or you could have a seperated tire or a knot in your tire.
2007-03-23 10:11:51 · answer #5 · answered by todayillsee 3 · 0⤊ 0⤋
That is your text book example of needing alignment. Take your car in and have it aligned.
2007-03-23 10:10:21 · answer #6 · answered by Mike 3 · 0⤊ 0⤋
It may be your wheels, you better get it checked out, That can be very dangerous
2007-03-23 10:18:53 · answer #7 · answered by Mainline 1 · 0⤊ 0⤋