My driver's side wheel has been squeaking/squealing HORRIBLY for a few months. It has progressed to every revolution of the wheel, regardless if brakes/clutch/accelerator are pushed in.
Please help! I want to try to avoid getting ripped off at the shop. My wheel isn't going to fall off right?!
2007-03-22 15:56:13 · 8 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
I thought I would clarify some things for you. First you brake caliper is definitely not locking up because that would heat up the wheel and rotor tremendously. This would also cause the wheel to pull to that direction.
I also read some body's comment about a thing that squeaks and reminds you to change your brakes. This is called the indicator and only squeaks when you apply the brakes. This usually just needs to be adjusted because it squeaks when there is still half the pad left. But never-the-less
That should help a lot to narrow down what the problem could be.
If the rotor was warped the wheel would shake really bad when you applied the brake but again would not cause a noise if the brake weren't applied.
your best bet is to take it to a few mechanics and if what they tell you is all the same have the one that is the cheapest fix the problem.
2007-03-22 16:52:49 · answer #1 · answered by z 2 · 0⤊ 0⤋
How are the brakes? Sounds like you need some rotors, a few months is too long to let something like that go on. You need a mechanic.
2007-03-22 22:59:39 · answer #2 · answered by fisherwoman 6 · 0⤊ 0⤋
In most newer cars there's a metal thing that as the brakes begin to deteriorate comes closer and closer to the brake disk. As it touches the disk, it creates an horrendous sound that reminds you to change your brakes. Ususally this is a bunch of bullsh*t to keep the brake people in business. But if you've never had your brakes done, then pay attention. Otherwise, instruct your shade tree mechanic to throw that thing away, as most will, when he puts the new brakes on your car.
2007-03-22 23:02:00 · answer #3 · answered by bubbasmith 3 · 0⤊ 2⤋
It could be a couple of things....you caliper (thing that makes ur brakes close on your rotor that stops your car) could be locking up. You may have worn your brakes down to where metal is scraping against your rotor. Your CV boot may be going out.
2007-03-22 23:01:11 · answer #4 · answered by jeff_elsten 3 · 0⤊ 0⤋
Your left front brake shoe is dragging. Sounds like your caliper is seizing. Shouldn't be a big expense, probably $60.
2007-03-22 23:12:45 · answer #5 · answered by whtcamp 3 · 0⤊ 0⤋
could be the drive shaft/bearings in the joint, depending on if your turning the wheel you could also get a grinding sound... $150-250 is my bet.
call a few places and get a quote... if they cant take the time to give you some prices and poss problem dont go there is my rule!
2007-03-22 23:03:30 · answer #6 · answered by Bellatrix 1 · 0⤊ 0⤋
Bite the bullet. Ignoring the problem won't make it go away.A good way to find a good shop is to ask other pros,like a tire guy,where he gets his brakes done.Find one good guy and he will lead you to the rest.
2007-03-22 23:00:54 · answer #7 · answered by kevin k 5 · 0⤊ 0⤋
I would start by depending on if it was the front or rear. If it is the rear jack it up, put it in gear and try a sander on the roters. If that doesn't work have the rotors turned and replace the pads.
2007-03-22 23:00:38 · answer #8 · answered by rustyislarry 1 · 0⤊ 1⤋