2007-03-22 15:30:57 · 8 answers · asked by Threeicys 6 in Cars & Transportation ➔ Other - Cars & Transportation
If your talking just the motor, and it's moving parts and none of the other parts, (Intake, exshaust, Electrical, fuel) then it would be the Rotory motor that mazda has. it just has a rotor, output shaft,and the block. No other moving parts. the rotor act as the piston, valves, and crank all in one. now if your talking about simplicity for working on them then the answer would be the newer Chevy motors.
2007-03-22 15:48:31 · answer #1 · answered by gearnofear 6 · 0⤊ 0⤋
I've always owned Chevys. The reasons used to be simple:
!) They used to have all interchanging drive components (i.e. the transmission from behind a six-cylinder would fit every motor up to the 454cid big block V-8!)
2) They were so popular that there was always a plethora of new/used parts available for rebuilding them.
3) They were always the cheapest to buy performance parts for.
5) They were easiest to work on.
6) They could be made to turn high RPMs & produce alot of horsepower for the longest time- for the least investment.(Several of my chevys went 200,000 plus miles, with minimal mainenance, & my lead-foot testing their metal!)
The new Chevrolets are more complicated than the pre-computerized ones, but they are still better to work on than the others, IMHO.
So, I guess that the reasons are still pretty simple, huh?!
(30 years & hundreds of thousands of miles of experience!)
2007-03-22 23:11:19 · answer #2 · answered by JOHN O 2 · 0⤊ 0⤋
Think outside the box :)
Yugo. Or Lada. Or any Chineese, Indian, or Iranian, or other developing country company, which still builds cars of half a century old design...
2007-03-22 23:55:43 · answer #3 · answered by Misha 3 · 0⤊ 0⤋
Small block chevrolet early 70's no smog minimal vacuum wires. But you have to deal with points unless you chnge the distributor
2007-03-22 22:39:57 · answer #4 · answered by calired67 4 · 0⤊ 1⤋
Ford Built Tough or Dodge Like a Rock?or like aftermarket such as LPE or Tein?
2007-03-22 22:35:52 · answer #5 · answered by JacobAbrahamson 2 · 0⤊ 1⤋
seems like it would have to be a diesel engine CZ it would have fewer parts, no ignition,, or maybe one of the foreign companies that still make a 2-cycle car engine, no valves.
2007-03-22 22:40:15 · answer #6 · answered by Jo Blo 6 · 0⤊ 1⤋
i own a repair shop ,and right now it would have to be Chevrolet,they have the most easiest ones to work on that there is right now,good luck hope this helps.
2007-03-22 22:36:23 · answer #7 · answered by dodge man 7 · 0⤊ 1⤋
Thats easy. chevrolet(GM). no vacuum lines, electrical is simply diagramed, and the basics are all there.
2007-03-22 22:36:13 · answer #8 · answered by Charley 1 · 0⤊ 1⤋