2007-03-22 09:45:26 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
if your that bad at diy take your key to the dealer
the key slides apart and battery fits inside
depending on type usually the loop prises off. take care there is a small micro chip inside for immobiliser!!!
2007-03-22 10:18:22 · answer #1 · answered by Anonymous · 1⤊ 0⤋
Normally there's a little slot where you can press a screwdriver blade to separate the 2 parts. The battery is then clearly visible. ALWAYS have the new battery ready before removing the old so you can change it quickly to avoid having to re-synchronise the lock codes. If you're at all unsure take it to a dealer. It's a cheap job
2007-03-23 00:23:44 · answer #2 · answered by The original Peter G 7 · 0⤊ 0⤋
a key cutting shop that cuts these keys and sells batterys will advise or fit if you buy battery from them. alternatively the main agents will advise.
2007-03-22 16:26:17 · answer #3 · answered by Mick W 7 · 0⤊ 0⤋