how do you remove the crank pulley on a 88-89 integra?

Question

we finally managed to get the bolt off, but the pulley won't budge. does anyone have any ideas?

we tried using the puller with a breaker bar, and it still isn't working. HELP!!!

Answer 1

Use a gear puller. This works by using a socket and ratchet.

http://www.autozone.com/servlet/UiBroker?UseCase=C001&UserAction=performMoreDetail&Parameters=TRUE%7C%7ESpecialty+%28Tools%29%7C%7ENONE%7C%7EGreat+Neck++++++++++++++++++++++++++5+-+Ton+Puller%7C%7ENONE%7C%7EFALSE%7C%7EFALSE%7C%7E516519%7C%7E616%7C%7E27078%7C%7ENONE%7C%7E%2440.00%7C%7ENONE%7C%7ENONE%7C%7ENONE%7C%7ENONE%7C%7E3.92%7C%7ENONE%7C%7EB%7C%7EGRN%7C%7Etrue

The piece in the middle pushes on the center, and the jaws pull the pulley. You just tighten the center bolt and it pulls the pulley off.

Using a breaker bar won't work, as all sides of the pulley have to come off at the exact same time.

You could also use a slide hammer, although you may not have the room to use it.

Answer 2

It's called a pulley puller.
Almost every auto parts store will rent you one.