i don't know if the gas gauge is working properly. If it did run out of gas how do you get it started with the fuel injection
2007-03-22 02:41:59 · 5 answers · asked by Diana K 1 in Cars & Transportation ➔ Maintenance & Repairs
Refill the fuel tank. The fuel system is self priming. No injector bleeding is required.
It would also be a good time to replace the fuel filter(s)
- - -
2007-03-22 02:54:03 · answer #1 · answered by Mr. T 7 · 0⤊ 0⤋
If it is out of gas there is no special trick to get it started. Just put gas in the tank and the fuel pump should pick it up and pump it to the engine.
2007-03-22 03:14:15 · answer #2 · answered by smoke 4 · 0⤊ 0⤋
An easy thing to do to help diagnose the problem is to check for ignition spark. You simply attach the alligator clip on the spark tester (link below) to any metal ground point on the top of your engine. Then disconnect any spark plug wire from its spark plug and reconnect it to the spark tester. A bright blue spark means you have good ignition spark. If not, troubleshoot your ignition system.
2007-03-22 03:06:00 · answer #3 · answered by bobweb 7 · 0⤊ 0⤋
just turn the key on and off three or for times and start it
2007-03-25 18:00:11 · answer #4 · answered by jsn_ayers 4 · 0⤊ 0⤋
put gas in...turn key....is a good way to start.
2007-03-22 02:46:43 · answer #5 · answered by Anonymous · 0⤊ 0⤋