English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I am building a computer system and am new to SATA technology. I am purchasing my first SATA hard drive.

The motherboard comes with the SATA data cable. What I want to know is if the power supply plugs directly into the SATA drive or does it need a special cable with a molex on one end?

On my hard drive wires, there are 2 different power cables besides the standard molex connectors. Would those be SATA power cables? They are black connectors and very thin.

2007-03-22 00:51:10 · 6 answers · asked by Mikey 2 in Computers & Internet Hardware Other - Hardware

6 answers

The SATA drives do connect directly to the power supply just as the PATA drives do. The connectors are different though. They are flatter and instead of 4 pins, they have 15 tiny contact points.

If your power supply does not have the SATA connectors, you can get an adapter that changes the 4-pin to the 15-pin.

2007-03-22 01:02:55 · answer #1 · answered by Wyoming Rider 6 · 0 0

Internal SATA drives will be powered through the power supply of the computer just as ATA drives were. However, SATA drives have a different power plug than ATA does. But... Some SATA drives will come with both the new SATA power plug and the old AT style Power plug (the larger four-pin white plug on the power supply), and you can choose which one to use. The new SATA power plug on your powersupply will be flat, wide, and black. 15 pins. The below link shows some pictures of the power plug that would be used. It's not impossible to have a motherboard with the SATA power coming out of it, but I've personnally never seen it and it's highly improbable.

2007-03-22 01:09:11 · answer #2 · answered by MarriedWithChildren 2 · 0 0

The SATA drives do get their power directly from the power supply. They use a flat, black, 15 pin connector, so it sounds like you might have the correct connector on your supply. If not, there are adaptors available.

2007-03-22 01:13:23 · answer #3 · answered by dewcoons 7 · 0 0

it would act precisely the comparable as in case you had a real SATA connector. i actually offered an IDE to SATA adapter because of the fact my motherboard in basic terms had one IDE slot and that i necessary that for my dvd- rom drives.

2016-10-19 08:07:54 · answer #4 · answered by ? 4 · 0 0

Use only SATA Cables!
READ your MOTHERBOARD USERS GUIDE!

Computer Help Page

http://www.nu2.nu/pebuilder/ http://oss.netfarm.it/winpe/
http://www.paraglidernc.com/ http://www.bootcd.us/

VISTA Upgrade or Requirements

http://www.microsoft.com/windows/products/windowsvista/buyorupgrade/upgradeadvisor.mspx

http://www.diskgenius.com/

http://www.pcbeginner.com/tools/pcdoctor.htm

http://www.pcguide.com/byop/index.htm

http://www.ntfs.com/boot-disk.htm

http://www.softpedia.com/get/System/Boot-Manager-Disk/

http://www.freedownloadscenter.com/Best/ntfs-boot-iso.html

http://www.disk-image.net/products.htm

http://www.bootdisk.com/bootdisk.htm

http://www.errornuker.com/info/01.php?hop=product1

http://www.nu2.nu/pebuilder

http://www.majorgeeks.com/downloads2.html

http://www.ntcompatible.com/Acronis_True_Image_9.0_Build_2337_s61449.html

http://www.theosfiles.com/

http://www.data-recovery-reviews.com/windows-startup-disasterrecovery.htm?gclid=CMSl0b7X2YcCFSJxYAodKy6Lpw

http://www.winternals.com/

http://www.pcworld.com/downloads/file/fid,25181-order,1-page,1-c,alldownloads/description.html

http://www.softpedia.com/get/System/Boot-Manager-Disk/Windows-XP-PowerPacker.shtml

http://www.extremetech.com/article2/0,1697,674406,00.asp

http://windows.about.com/od/tipsarchive/l/bltip632.htm
Visit our Helpdesk for PC Bug Doctor
http://www.maximumsoftwaresupport.com
PC Beginner software
http://www.pchell.com/support/limitedconnectivity.shtml
http://www.nu2.nu/pebuilder/
http://www.bootdisk.com/utility.htm
Chapter 1: Purchasing Components
Chapter 2: Component Overview
Chapter 3: Installing the CPU, Heatsink, and RAM On The Mainboard
Chapter 4: Installing The Mainboard In The Case
Chapter 5: Installing Drives
Chapter 6: Connecting Components
Chapter 7: Installing AGP and PCI Cards
Chapter 8: Testing the System and Completing Assembly
Chapter 9: Installing Windows XP
Chapter 10: Configuring Windows XP
Chapter 11: Installing A Dual Boot Operating System (Linux And Windows XP)
Chapter 12: Home Video -- “So, You Want to Be the Next Steven Spielberg?”
Chapter 13: What’s Next?

http://www.hardwareanalysis.com
http://www.majorgeeks.com/download4007.html
http://www.nu2.nu/bootdisk/
http://www.free-pc-checkup.com/
http://www.pctools.com/registry-mechanic/?ref=Googlebspeed
http://pcperformancetools.com/recovermyfiles.htm
http://free.grisoft.com/freeweb.php/doc/...
http://www.download.com/3000-2144-100459...
http://www.worldstart.com/tips/tips.php/...
http://www.aarp.org/learntech/computers/...
http://www.microsoft.com/windowsxp/using...
http://www.zonelabs.com/store/content/co...

BUILD YOU OWN COMPUTER:
www.directron.com
www.newegg.com

A Good PC Cleaner

http://www.pc-error-cleaner.com/?gclid=COzW8YTD0ogCFRL1YgodAD0pbg

NTFS Boot Disk:

http://www.ntfs.com/boot_disk_includes.htm

To place Active@ KillDisk Pro onto a floppy disk type the following at the command prompt:
COPY G:\KILLDISK.EXE A:
COPY G:\DOS4GW.EXE A:
The above assumes that the G:\ drive is the bootable CD-ROM drive and the A:\ drive is the floppy disk drive.
DOS4GW.EXE is a required file for Active@ KillDisk, Active@ UNERASER and Active@ Disk Image.

http://www.download.com/BartPE-Bootable-Live-Windows-CD-DVD/3000-2094_4-10611130.html

2007-03-22 01:42:00 · answer #5 · answered by Anonymous · 0 0

Yes there r power supplyes that have s-ata power cables included , and others don't, but now thare r some kind of s-ata hdd's that have support for molex and s-ata power cables

2007-03-22 01:00:02 · answer #6 · answered by BADEA SOREANU L 1 · 0 0

fedest.com, questions and answers