My change oil light keeps coming on even after I had the oil changed?
2007-03-21 16:34:17 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Chevrolet
GM OIL LIFE SYSTEM - RESETTING
1. With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until "OIL" is displayed on the Driver Information Center.
2. Once "OIL" is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replace by 100 indicating 100 percent oil life remaining.
3. Turn the key to "OFF".
4. If the "Change Engine Oil" message comes back on, the engine oil life monitor has not reset. Repeat the procedure.
2007-03-21 16:41:43 · answer #1 · answered by Magikmann 4 · 2⤊ 0⤋
Venture 2004
2016-10-29 04:51:25 · answer #2 · answered by ? 4 · 0⤊ 0⤋
The engine oil life system has to be reset after an oil change. The engine is clueless whether it has clean or dirty oil in the crankcase, the light or message comes on only after the engine computer decides that enough miles and other factors have been reached to activate it. Whoever changes your oil should reset the light for you or read you owners manual for the specific directions for your vehicle.
2007-03-21 17:01:45 · answer #3 · answered by lwjksu89 3 · 0⤊ 1⤋
in the owners manual it say that if it doesnt restet it self then you should start the car for 10 min then turn it back off for a lil while then it should reset....well atleast it does in a 2000
2007-03-21 16:40:22 · answer #4 · answered by Anonymous · 0⤊ 1⤋