Yes
If you have a wireless range extender for the adapter on "your PC".
Radio signals may be amplified on either end with the proper devices.... but there are still limitations.
regards,
Philip T
2007-03-21 13:17:14
·
answer #1
·
answered by Philip T 7
·
0⤊
1⤋
Rule of thumb.. If your wireless card can see the singnal.. You can connect. Unless the signal is wep key protected or mac-address filtered. Then you need the wep key or the mac-address from your wireless card put into the main system.
2007-03-21 13:29:44
·
answer #2
·
answered by madwizard56 2
·
0⤊
0⤋
If there are no wireless access points in range of your computer, you cannot connect to a wireless network; unless if you get a wireless network card.
2007-03-21 13:13:14
·
answer #3
·
answered by Anonymous
·
0⤊
2⤋
You the two choose a on the spot bridge, or a router able to being configured as a on the spot bridge. maximum routers can not try this natively, yet as reported many Linksys routers can with third occasion DD-WRT firmware. i exploit a Zyxel P-330W router in on the spot shopper bridge mode to connect my under pressure pc, an previous pc, and BluRay participant to my DSL on the spot/modem/router in basement. you're waiting to discover one for a greater useful value than a on the spot bridge.
2016-12-19 11:03:15
·
answer #4
·
answered by ? 3
·
0⤊
0⤋
No, it stand to reason that if their is no signal, there is nothing to connect to. Think about it a while!
2007-03-21 13:15:45
·
answer #5
·
answered by Roadman 6
·
1⤊
0⤋
No not on your nelly, unless you find another way to connect up
2007-03-21 13:17:58
·
answer #6
·
answered by whizzbitz 2
·
0⤊
0⤋
Well, no. Unless you're like the guys who build extra-strong antennas for their wifi.
http://www.wifiworldrecord.com/
2007-03-21 13:25:39
·
answer #7
·
answered by romulusnr 5
·
0⤊
0⤋
LOL,No.Will your car run without gas?
2007-03-21 13:18:18
·
answer #8
·
answered by Anonymous
·
0⤊
0⤋