anybody know how to disable/bypass a water filter in a fridge,my water and icemaker not working?

Question

its a frigidaire side by side, im really upset the replacement filter is around $40, im happy with no filter,but i cant figure out how to disable/bypass so my water and icemaker will still work.thanks in advance for any ideas!

Answer 1

The water supply line has a tap where it is connected to the house water. It has a shut-off valve. Turn it clockwise until closed. Then remove the filter cartridge and put it back together, open the tap.

You do realize that while the filter may have activated charcoal in it to improve the taste, it also filters out bits of crap that might jam or ruin your fridges innards? $40 might not be so costly. Perhaps you could extend the change out cycle instead?

Answer 2

OK when you got your fridge did you keep the plug cap for the filter? you can put the plug cap in instead of the filter, if you don't have it , call the place where you got it it have your model and serial handy and get one ordered,$5-6 bucks,once the plug is in there you can use your water and ice fine unless your having water line troubles?

Answer 3

if you don't use the filter you risk messing up the ice-maker and water dispenser which will cost way more than that filter will and if it is the filter that is keeping it from working now ...the filter has already saved you that expense...it is my recommendation that you replace filter

Answer 4

There should be a plug to put in the filter space. If it is missing, you can order one from your local parts store.

Answer 5

it you by pass the filter, you will get trash in the system and it will evenually clog up somewhere else. are you sure it is the filter? it maybe the valve has gone out.

Answer 6

most mnuf have bypass plugs ussually comes with the fridg when its new if you don't have it go to their web site you'll find it there.

Answer 7

if I disconnect water line , is there any need to turn water back on?