In the last snow storm the wiper was messed-up from ice. Now it only goes up half way and then slams down.
2007-03-21 02:04:08 · 4 answers · asked by LindaAnn 4 in Cars & Transportation ➔ Maintenance & Repairs
Just turn the wipers on and turn the ignition switch off when the drivers side arm is pointing up. Then take off the passenger arm and put it back on pointing the same way as the drivers arm.
2007-03-21 04:21:25 · answer #1 · answered by Nomadd 7 · 0⤊ 0⤋
Some imports have a nut where the wiper arm mounts. If you have these , loosen the nut and reposition the arm. Retighten
the nut and you should be all set.
2007-03-21 09:46:12 · answer #2 · answered by R1volta 6 · 0⤊ 0⤋
Take for the arm completely to make sure its' not in the motor and if not them replace the whole blade unit only.
2007-03-21 09:06:50 · answer #3 · answered by Anonymous · 0⤊ 0⤋
sounds like you stripped the teeth on the arm you can get a new one from your dealer and they will install it for you. or if you can do it than all you will need is the part...........good luck.........
2007-03-21 09:16:34 · answer #4 · answered by Good ol boy 2 · 0⤊ 0⤋