2004 Ford Taures. Directional signal wont turn off automatically?

Question

Can someone tell me how to fix my turn signal switch to turn off after I make my turn. I have to flip handle to off to turn off signal.

Answer 1

You need to replace the multifunction switch (the switch that controls the wipers/hi-lo beams/turn signals/hazards). This part should be covered under warranty, if you are still within the warranty period. Hope this helps.

Answer 2

It's probably not the switch. It's a piece inside the steering wheel that releases the lever when the wheel turns. You have to take the steering wheel off to see why it isn't doing the job. The safest way to remove the airbag is leave the battery disconnected for an hour. There's a big capacitor in the airbag mechanism that needs to drain down before it's safe.

Answer 3

It's actually a cam that returns the switch, inside your steering column. The airbag and steering wheel need to be removed. Definitely left to the experts, and hopefully covered under warranty.

Answer 4

The door ajar change is caught, many times interior the drivers door (this is placed on the exterior of the door latch interior the door) and as some have suggested, wd40 can get it to artwork lower back yet I even have recent in extreme humidity areas the fix won't final too long and could require the latch to be partly bumped off to interchange the door change. many times approximately an hour interest and the area is approximately $20 from Ford.

Answer 5

multifunction switch...get a pro to fix it..dont mess with airbag or electric unless u know what your doing.

Answer 6

get a spray can of electrical contact cleaner with the little red spray tube that you attach to it,spray a little up in ware the control handle goes into the steering Coulomb.if that doesn't work take it into a repair shop.