My propellers were smashed on a coral head while at anchor in rough seas. I need to change them under water. Need advice from someone who has done this before, or insight into extra problems I may come across while trying to do this. The water is shallow enough to stand in, but no possibility to haul the boat where it is.
2007-03-20 20:37:20 · 2 answers · asked by Sanmigsean 6 in Cars & Transportation ➔ Boats & Boating
It wasn't anchored in water that shallow, I've relocated the boat since the incident.
2007-03-20 20:39:45 · update #1
the outside comes off easily. the inner requires a special tool. i fashioned one from a 14" piece of ...i think 1 1/4" galvanized pipe. i've changed them in the water before.
2007-03-21 00:30:34 · answer #1 · answered by Anonymous · 0⤊ 0⤋
The special tool for the inner prop is essential. If the inner nut is not too tight, you might be able to get it with channel lock pliers. I bet your prop shaft is bent so your boat is going to have to come out to at least have it checked. Good luck!
2007-03-21 09:38:36 · answer #2 · answered by Wally T 3 · 0⤊ 0⤋