codes po113, po102, po301, po316, po302,
ok this is what i found out..... codes 301 and 302 are misfires but i have replaced the plugs and wires and then today i took it back and there was a connector off where the air filter goes..which caused 113 and 102 codes. the codes have been cleared but the engine light came back on and it shows misfire still yet..what is causing the misfire and what is code 316
2007-03-20 13:40:24 · 6 answers · asked by grlw1981 2 in Cars & Transportation ➔ Maintenance & Repairs
thanks for the help..i will have the ford company to try this out tomorrow...
2007-03-20 15:45:10 · update #1
p316-misfire occured in the first 1000 engine revolutions
possible causes
damaged ckp sensor
ignition system
fuel injectors
running out of fuel
fuel quality
damaged pcm
Vehicle Description: 2002 Ford Taurus 3.0L, GAS, Vin U
Mileage: 50106
Customer Concern: Has codes P0303, P0306 and P0316.
Tests/Procedures: Informed of TSB 02-22-3 concerning trouble code P0316. Suggest to have a dealer reflash the Powertrain Control Module first, then recheck for any further driveability or misfire concerns.
Potential Causes: PCM strategy.
Tech Tips:
User Comments: Close Comment(s)
Category: Engine Performance
Diagnostic Codes
Call Date: 11/29/2004
Key Number: 60424
User Comments
Posted By: What Fixed It / Confirmed Fix
.
3/9/2005 2002 Ford Taurus 3.0L, GAS, Vin S (Similar)
Ignition Coil Pack
coil packs
2007-03-20 21:00:31 · answer #1 · answered by russ G 3 · 0⤊ 0⤋
P0316 Engine Misfire Detected on Startup (First 1000 Revolutions)
2007-03-20 13:50:41 · answer #2 · answered by Fordman 7 · 0⤊ 0⤋
P0316 Misfire Detected On Startup (First 1000 Revolutions)
2007-03-20 13:48:14 · answer #3 · answered by scott h 3 · 0⤊ 0⤋
P0316 Engine Code
2016-10-22 11:12:33 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Code PO316 is an engine misfire at startup. You are still having misfire issues. I hop you didnt use Bosh or NGK plugs. They are junk and will cause misfires..... Use Champion or AC delco or Autolite platinum plugs. If you have a distributer then change the dist cap. If you use a coil pack it could be the coils. Try good plugs first.
2007-03-20 13:44:57 · answer #5 · answered by Anonymous · 0⤊ 1⤋
go back to ford and get the right plugs for the car this car came with platinum plugs and some part store gives you the cheapest plug
2007-03-20 13:48:35 · answer #6 · answered by lake d 2 · 1⤊ 0⤋