ibm think pad 600 bios problems?

Question

ihave a ibm thinkpad 600 and had a new hard drive fitted could any1 tell me how i get in the bios mode cus i need to re-install windows xp but the cd is a copy and when i insert it says ntldr is missing and i have been told to mess with my bios to fix any ideas thanx

Answer 1

For IBM you press F1 when you first turn it on to enter Bios. The Bios on the older IBM Laptops is fairly simple and not a lot of options to change.
I have a 770 and iSeries.
You may need to "Flash" the Bios and upgrade. Look on the bottom and find your model number. I try to find you the support page.
Well, maybe their server is down. But, I got this link;
http://www.lenovo.com/us/en/
Look to the right for Downloads and Support once you get in you can have it "Autodetect" your computer or enter the information on bottom. You are searching for XP upgrade.
AND, IBM sold out to Lenovo (China) that why you see Lenovo and not IBM.

Answer 2

Start to notebook and press F1 or F10 to get into bios. Go to boot sequence and chose CD Drive. and if it does not work than try install with another Windows XP CD

Answer 3

attempt this: "Hacking IBM thinkpad BIOS Password lost your IBM ThinkPad supervisor password? No concern, in this internet site i visit tutor you the thank you to recuperate your old password." notice-"The supervisor (SVP) password is saved in a chip called ATMEL 24RF08.it could't be reset by ability of disconnecting the BIOS battery or shorting any jumper. It should be study so as to decipher the password. For this we prefer some sort of hardware so study on…" If this doesnt artwork your in basic terms different determination is sending it into IBM, or a working laptop or pc save.

Answer 4

When you restart your computer, there should be an option to either press del or f8 or f6, and that should get you into the bios settings. Then, set the computer to boot from CD, then save settings and reboot computer. It should boot from the windows xp cd and then follow the instructions.