what is the firing order for the cables that go to the distributer cap?

Question

someone pulled out all the cable wires instead of one at a time. if anyone has a diagram or knows the EXACT firing order...please send me a message. i need to fix this **** today. thank you!!!!! ***************oh, by the way, it's for a 1989 Dodge Raider, 6 cylinders.

Answer 1

a local auto parts store should have a diagram. sometimes on the intake manifold they also have these written or in the owners manual. if this is a 3.0 engine i think its made by Mitsubishi. look real close on the distributor.sometimes they are even on there. the biggest problem you are still going to have is where does number 1 start. so you might ask the parts store that to.good luck

Answer 2

First off, look on the intake manifold of the engine...most of the time the firing order is stamped onit....second...look on the distributor cap to see if there is a #1 on it...a lot of time manufactors will place a one where the #1 plug wire goes....if it does not have a 1 on the cap then pull the cap and pull the number 1 spark plug out and make for sure it is on the compression stroke and at top dead center, then see where the rotor is pointing....this should line up with one of the prongs on the cap when you replace it.....this should be the #1 cyclinder and then follow the firing order off of the intake manifold......


good luck

Answer 3

Being a grasp mechanic for over 30 years permit me be the 1st one to allow you recognize in case you have not have been given a clue regarding the ideal spark plug twine place on the distributer cap you mustn't be touching a automobile!! you will get harm!

Answer 4

Firing order 1-2-3-4-5-6
front | 1 3 5 |
of
vehicle | 2 4 6 |
distributor rotates counter clockwise

http://autozone.com/servlet/UiBroker?UseCase=C001&UserAction=performSearch&Parameters=Auto+Store%7C%7ESPECIFICATIONS%7C%7EFiring+Order