The droplines on the main manifold for the cooler injectors have frozen shut and the back bleed of the plazma coolant has taken my first and secondary engines offline. I've fallen out of warp and my impulse seems to be compromised.
Any thoughts???
2007-03-19 16:22:40 · 8 answers · asked by M.S. Mom 4 in Cars & Transportation ➔ Maintenance & Repairs
Spikemode, I'm shutting down to replace lines never occured to me. I guess I will take that egineers advanced course back at the fleet. Thanks for the help.
2007-03-19 17:26:19 · update #1
Spikemode, shutting down to replace lines never occured to me. I guess I will take that egineers advanced course back at the fleet. Thanks for the help.
2007-03-19 17:27:02 · update #2
First, switch to auxilliary power! While the main engines are off line replace droplines with new titiainium lines with ceramic coating (VERY IMPORTANT!!) Replace main, and secondary relay assemblies for the plazma coolant tranfer pumps. Follow the proceedure for manual overide of plazma coolant transfer pumps (pull fuseable link from housing) until main engine #1 can be spooled to 25% total operational limit. When Turbine Core temp. reaches 770 centegrade, re-energize plazma coolant transfer pump, and spool engine to 95% tol. Repeat steps in exact order for engine #2! If steps are not followed exactly, main compressor fan will fail and life support system will follow! Write up an inspection order for the plazma coolant pressure regulator, and have serviced as soon as possible. When you have both main engines on line, reset breaker for impulse power, and charge. Impulse power available within 6 seconds. Hold speed to within Warp 8.785 for the first 5,000,000 lightyears as it gives the pumps a chance to settle in. Enter in to ships log as PCTP- 1349 (Code for Plazma coolant Tranfer Pump, steps 1,3,4,9) Make a note to the Captains log for repair. Switch aux. power off, and happy trails!
2007-03-19 17:04:27 · answer #1 · answered by spikemode 2 · 2⤊ 1⤋
all depent on ,how much You has fallen out of warp and how strong are Your impulses.
since You are asking ,you does not seems so much compromised.
compromised is when You don't even feels the plazma bleeding and the injectors have hot shuts.
don't worry about the drop lines.Just relax and let it drop in the main manifold. for to cool the injectors.
2007-03-19 23:47:51 · answer #2 · answered by Anonymous · 1⤊ 0⤋
Use the reverse flow valve from the warp core and feed it to the plasma coolant ducts. This will thaw the droplines and free the injectors.
2007-03-19 23:34:04 · answer #3 · answered by R1volta 6 · 1⤊ 0⤋
Lady: You are to High Tech for Me,--I haven"t heard this
kind of analysis ,since I Retired From B 1 B Jet Aircraft.
2007-03-19 23:41:32 · answer #4 · answered by section hand 6 · 0⤊ 0⤋
this is 2007
you need to get some dry ice to keep things cold enough to travel through to 2050. I will have parts to help repair the time machine. Good luck
pack the ice under all 4 hoods
see you soon
2007-03-19 23:37:07 · answer #5 · answered by DAVE J 1 · 1⤊ 0⤋
Self destruct in 3..2..1..
2007-03-19 23:26:42 · answer #6 · answered by red77chevy350 4 · 0⤊ 0⤋
You are in a real pickle. I would start by dehyrdating your transaxle and then wiggling the bendix resistor. If that doesn't work, you can always degrease the universal transformer.
2007-03-19 23:32:31 · answer #7 · answered by Mike Hunt 5 · 0⤊ 0⤋
I'd buy that for a dollar
2007-03-19 23:43:55 · answer #8 · answered by 7.62x54 5 · 0⤊ 0⤋