After washing my dark clothes I noticed they seemed to have some kind of white chalk like substance. What should I do to avoid this problem again?
2007-03-19 10:10:46 · 11 answers · asked by SassySista 2 in Home & Garden ➔ Cleaning & Laundry
There are a handful of problems that can cause this. First, if you use powder detergent, put it in the machine first then put your clothes in. You shouldn't have to pre-dissolve it, and if you find that is the case, you may want to switch to a different brand (I like Arm & Hammer Free & Tide Free). Second, if you are using the full amount of detergent recommended for a heavily soiled load, you are using way too much and the soap people love you! For the average load you only need the minimum recommended, your clothes will actually be cleaner, and rinse better. Third, if you have a top load machine, you may be overloading it. This doesn't allow the clothes to agitate properly and thus the soap doesn't rinse out well. Fourth, instead of a typical fabric softener, try using white vinegar in the rinse cycle. This will break down any remaining soap and will return your clothes to their natural softness. If you are in the market for a new machine, consider a front load machine. Not only are front loaders more efficient, but they do a better job at cleaning your clothes. Although it is recommended, it is not necessary to buy special soap. Good Luck!
2007-03-19 10:32:06 · answer #1 · answered by Brian L 4 · 0⤊ 0⤋
If you are using powdered detergent, and washing in cold, the detergent doesn't always dissolve completely. Try adding the detergent to the washer first, and add clothes after there's a fair amount of water in the machine. The other alternative is to use liquid detertgent. Hope this helps!
2007-03-19 10:16:59 · answer #2 · answered by BJ L 1 · 0⤊ 0⤋
Did you use powdered or liquid laundry detergent. Sometimes, if you use powdered, and don't let it agitate in the laundry for a little bit before putting in your clothes, it will leave a residue. If this is the case, just put in the powder and fill up the machine to the proper level and let it agitate for a few seconds to a minute before adding your clothes. This will help dissolve the powder.
2007-03-19 10:15:12 · answer #3 · answered by ♫ frosty ♫ 6 · 1⤊ 0⤋
It could be one of several things. You may be using too much detergent or you may be overloading the machine and the soap is not being rinsed out completely. It is amazing but I have found that most loads can be done with half the recommended amount of detergent. If you have an extremely dirty load, just soak in borax before laundering.
2007-03-19 11:35:38 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Do you use powder soap? If so, put it in the washer first and let "dissolve" prior to putting the clothes in. I had this same problem before, and it was the powder soap not dissolving completely.
2007-03-19 10:16:27 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Is your detergent properly added to your washer before you add your clothing? That's what it sounds like to me. Fill your washer with water, then add your detergent, then allow to agitate a little, then add your clothes. If you're using a powdered detergent, try switching to a licquid.
2007-03-19 10:16:36 · answer #6 · answered by Shortstuff13 7 · 0⤊ 0⤋
I've also noticed this it depends what detergent I've been using and it's always the black clothing it affects i just put it on to an extra rinse and they disappear.
2007-03-20 03:12:00 · answer #7 · answered by Mea 5 · 0⤊ 0⤋
Rinse them again. Probably just soap, make sure it dissolves before putting clothes in.
2007-03-19 10:17:30 · answer #8 · answered by reader 2 · 0⤊ 0⤋
Check the pockets for chalk?
2007-03-19 10:14:36 · answer #9 · answered by johN p. aka-Hey you. 7 · 0⤊ 0⤋
use liquid laundry detergent,had the problem too with powder soap,also liquid soap for dark cloth works great too
2007-03-19 10:34:36 · answer #10 · answered by Anonymous · 0⤊ 0⤋