2007-03-19 09:59:17 · 5 answers · asked by Gerri S 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
It depends on what oil pan and filter are on the motor, but it's usually 6-7 quarts.
2007-03-19 10:16:55 · answer #1 · answered by Anonymous · 0⤊ 0⤋
5 total quarts in a car including the filter. The filter is a PF-35 AC Delco. Here's an oil and oil filter change tip. Before putting a new filter on carefully fill the center hole till the oil reaches to top of the interior threads and spin the filter back on.
The reason for this: The motor will have much quicker oil pressure preventing "dry" start up. This tip came from Bill "Grumpy" Jenkins drag race engine builder from Malvern PA..
2007-03-19 12:40:34 · answer #2 · answered by Country Boy 7 · 0⤊ 0⤋
Depends on your oil pan. Start out with a new filter and ad 5 qtsWait a min. and check the dipstick as it reads add 1 qt and depending on how low it is on the dipstick add some to bring it up to the mark. DO NOT OVERFILL!!!! As this is worse than running a qt low. Reason being the oil foams up and won't flow while the crankshaft is spinning.
2007-03-19 12:18:49 · answer #3 · answered by Anonymous · 0⤊ 0⤋
YES- thats a 7.4 liter right? sweet POWER- we use to tow a 4000lbs boat with that out of the river without pealing the tires- NO-body i saw ever did that.. weight to power ratio is awsome.. anyways i sold it cuz $$gas$$ . but it was about 6qts then wait and check the dip-stick to make sure. cuz i belive i allways added more after i checked. although i was drinking at the time..
2007-03-19 11:57:13 · answer #4 · answered by Moe D 2 · 0⤊ 0⤋
thanks for nothing
2015-10-24 10:40:58 · answer #5 · answered by Rhonda 1 · 0⤊ 0⤋