How do you keep wood from turning your aquarium water murky brown?

Question

I would like to put a piece of wood in one of my fish tanks, with an Oscar in it. I am planning on getting the wood from my backyard, because I have heard of people doing it before and the outcome is beautiful. But, I also know how the wood will turn the water a gross murky brown and I am a clean water fanatic. I know that you can keep the wood from doing that, but I don’t know how. So… do any of you?

Answer 1

Seal it with food grade polyurathene. You can get this at a paint store, just be very sure it's food grade like for use on counter tops and chopping blocks. As an additional note, I wouldn't use wood from the yard unless it was well sealed, it will simply rot over time and won't take long to do it.

MM

Answer 2

I really wouldnt consider putting wood from your backyard into your fishtank! You dont know what grot and grime is on there that may affect your fish.

If you want to put wood into your tank, buy some bogwood from a fish shop or even one of the resin cast wood sections.

We have a piece of bogwood in our tank as well as a bit of cast root style decoration. Both look lovely, both are safe and neither make the water murky.

Answer 3

My friend used stones in the tank with his Oscar. I would be wary of wood, especially if it had any prior chemical treatments.

Answer 4

Wood is fine in a tank, but it has to be sterilized.

Boil it if it is small enough to fit in a pot.

If it is not, seal it in an airtight clear plastic bag and leave it out in the sun for a few days. This is called "solar sterilizing"

Answer 5

You can just boil it for a few hours. Honestly the tanin looks bad, but it's harmless. In a few week it will all leech out, and a new carbon filter will clear things up.

Answer 6

you have to boil driftwood. If you dont, it will release tannins into the water, thats what ur seeing.

Answer 7

don't put wood in it