how to setup a wireless access point?

Question

i have a normal router and i bought a wireless access point splitter. does the wireless access point require setup from the computer or as soon as i plug the port from the router it will start the wireless signals? thank you

Answer 1

It usually does start off with the default settings.... depending on the router (check the manual) you should be able to access the routers setup page and change the settings. like enable security, change the default SSID and change the channels and set your custom password....

These are all recommended but not necessary... for your network to be stable do set atleast some basic security on your wireless router.... all the best...

Answer 2

to characteristic to the above super answer I had an identical project yet because i like to hack around and play i bought a Linksys WRT54G (or WRT54GS $$) and placed on dd-wrt firmware. The firmware enables you to set it up a repeater, a bridge or maybe a ordinary AutoAP repeater. Its relaxing to play with and not just about as high priced. Their wiki has super step by employing steps besides. so some distance as employing a reflector or larger income antenna... those could make some distinction yet once you're employing a working laptop or laptop those at the instant are not a possible option. while you're employing a tower on the different hand and the antenna is hooked as much as the back of the tower like somewhat stressful tail then a reflector is out of the question, yet a under pressure out antenna will make some distinction. A reflector won't help you lots while you're already connecting on refracted sign (its bouncing off different issues to get to you). while the sign is refracted you're able to have packet loss this is amazingly severe. no count if it fairly is a first rate router and you're experiencing packet loss exchange the ACK timing to a decrease style (exchange it by employing the 1000's at a time). sturdy good fortune.