I would like to convert the rear-drive to posi-track instead of limited slip.
2007-03-18 16:25:10 · 4 answers · asked by Aaron B 1 in Cars & Transportation ➔ Maintenance & Repairs
i own a shop,and the easiest way to do this is just change the stump in it,there's a lot that will fit it,ask at any junk yard they have a interchange book and can tell you exactly what you need for it,good luck i hope this helps.
2007-03-18 16:30:26 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
I think you are asking if you can change it to a "Locker" ..Posi-trak I think is just a nickname for a limited slip differential that uses clutches.. I don't know if a locker is made for the (I think they used 8" rear end).
2007-03-18 23:28:55 · answer #2 · answered by the_buccaru 5 · 0⤊ 0⤋
the easyist and cheapest way is weld the spyder gears but if not done rite you can tear things up to so be carefull
2007-03-19 03:57:51 · answer #3 · answered by Joshua W 2 · 0⤊ 0⤋
when you have both rear wheels off the ground and you spin one and the other goes the same way you already have it .
2007-03-19 15:54:55 · answer #4 · answered by sterling m 6 · 0⤊ 0⤋