i have two bell satallite recivers and when i split the signal to go to both of them only one works. how can i get them both to work?
2007-03-18 12:18:09 · 3 answers · asked by Anonymous in Consumer Electronics ➔ TiVO & DVRs
Always remember you can never split the signal from the LNB. that is the part on the dish that the coax wire screws into. You have to have a strait shot from the LNB to the receiver. From the out to TV on your receiver you can split it to another room. Another way if you have a dual LNB is to run it into a multi switch.
2007-03-18 14:18:50 · answer #1 · answered by TREX 3 · 0⤊ 0⤋
Splitters do not work with satellite cable. You need a straight connection from the satellite to the receiver. Nothing in between.
2007-03-18 15:33:12 · answer #2 · answered by Chris L 7 · 0⤊ 0⤋
Hi Daniel,
Are you sure your splitter is good? I had the same problem and after several days of messing around I bought a new splitter and Bingo - it worked.
Norm
2007-03-18 12:51:34 · answer #3 · answered by Anonymous · 0⤊ 0⤋