Ok i got the S-Video cord, i got cords for the audio, and i hit the F8 button to get the computer to transfer to the tv, but all that happens is my tv pops a little and you can hear the audio, but no picture. Does anyone know what else I need to make it work or what i'm not doing right?
2007-03-18 02:28:03 · 5 answers · asked by Queen of Dymeondz 1 in Computers & Internet ➔ Hardware ➔ Laptops & Notebooks
there should be a cord with three different plug ins attached to the end, one red, one yellow, and one white.
This may be wrong information, but that is what i do with my laptop,
you can also try googling it and try to find your make and model on www.dellcomputers.com
Hope this helps!
2007-03-18 02:31:17 · answer #1 · answered by ? 1 · 0⤊ 0⤋
You will probably need to go to control panel:
Click the Start button, click Control Panel, click Appearance and Themes, and then click Display.
The Display Properties window appears.
Click the Settings tab.
Click Advanced.
Click the nView tab.
Click the circle to the left of Clone below the nView Modes category.
This will move the radio dot from Standard to Clone.
2007-03-18 09:50:46 · answer #2 · answered by jimmymae2000 7 · 0⤊ 0⤋
i ha the same prob be for if you running on window on the desktop right click an go to setting there should be an advanced tab there click on it and then go to displays thenclick the powerr on the tv tab then apply the settings
\
2007-03-18 09:42:11 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Just check if you have the video cable in the " video in plug" and not the "video out plug" good luck
2007-03-18 09:37:18 · answer #4 · answered by Guy 3 · 0⤊ 0⤋
see if you have the cable plugged in right
2007-03-25 02:46:54 · answer #5 · answered by kitty 6 · 0⤊ 0⤋