how do you get the calipers of the rotors i dont see the two bolts to take it of.
2007-03-16 08:26:31 · 2 answers · asked by halpinator36 2 in Cars & Transportation ➔ Maintenance & Repairs
Cavaliers have a 3/8 inch inverted hex bolt. Meaning the whole bolt is round and has a hex shape (like a regular bolt head) cut out of it. There's one on the top and one on the bottom on the back side. If your caliper is dirty it maybe hard to find. Go get the correct tool. It's about $5 at the parts store and will save you dearly. I don't even know how you'd get them off if you stripped that hole. They sit down inside the caliper a little.
2007-03-16 09:12:04 · answer #1 · answered by iwingameover 5 · 0⤊ 0⤋
The two bolts are on the back side. When you remove the calipers some time you have to pry them up and off. Then when you put them back on and bolt them in place, push the break down about half way untill you feel the break again. You may have to do this more then 1 time untill you feel the break again.
2007-03-16 15:32:22 · answer #2 · answered by goldwing127959 6 · 0⤊ 0⤋