we are working on a 1974 nova 2 door and the car is dog trailing and we need to know if the frame is bent
2007-03-16 07:08:29 · 3 answers · asked by mark k 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
try http://www.ebay.com or http://www.onlineauction.com Or http://www.craigslist.org
2007-03-16 07:14:18 · answer #1 · answered by ebelmontinc 2 · 0⤊ 0⤋
Unibody car, no frame. It has a subframe from about the front floors forward. It could be a broken center bolt in the rear axle spring pack. Look at the rear wheels. Are they centered in the wheel opening? Don't loosen the subframe, and move it around as it will through the body lines out of whack, and if it is a center bolt or bent unibody problem you will not be fixing it by doing this. You don't measure the frame by the wheels, and if you did a 1/4 inch when it comes to a frame is still to far out.Take it to a frame shop and have them measure it.
2007-03-16 20:25:18 · answer #2 · answered by Blazin 5 · 0⤊ 0⤋
this car has sub frames , loosen the body to sub frame bolts and move them so that your wheels diagonal measurements are within 1/4 inch of each other.
2007-03-16 16:12:32 · answer #3 · answered by sterling m 6 · 0⤊ 0⤋