I want to upgrade my PC from 512 MB to 2 GB. I have two DDR slots and I want to put 1 GB in both slots. Here's the dilemma: my systems specifications says "Maximum allowed memory 1 GB (2 x 512 MB)". Does this mean I can't exceed 1 GB total? Will it hurt my system if add 1 extra GB?
2007-03-16 03:20:04 · 12 answers · asked by metroryry 1 in Computers & Internet ➔ Hardware ➔ Desktops
I just looked up info on my motherboard and it says:
Memory:
2 x 184-pin DDR DIMM sockets
Support up to maximum 2 GB memory (PC manufacturer's maximum memory may differ)
Supports unbuffered PC2700/2100 non-ECC DDR SDRAM memory
So I guess that answers my question.
2007-03-16 03:29:56 · update #1
Currently I'm running XP, but I'm trying to get my PC ready for Vista. All I need is to upgrade my memory and graphics card.
2007-03-16 03:41:47 · update #2
To make sure run crucials memory scanner and it will tell you the maximum you can use for your motherboard and what memory you need. You can then print it off and buy it anywhere.
http://www.crucial.com/systemscanner/
2007-03-16 03:39:45 · answer #1 · answered by jackie_1969uk 5 · 0⤊ 0⤋
Sounds like your system architecture can't address space beyond 512 MB per slot. Installing a larger memory module will likely cause your system to not boot up or if it does, the memory won't be usable beyond 512 MB per slot. Memory is cheap, but I'd hate to waste money on memory that won't work in the system.
If you really want to pursue this further, try some Google searches using your mother board information and terms like "over clocking" (these are the type of users who might try to exceed system specifications and may have tried larger memory amounts) or "memory size".
2007-03-16 03:26:09 · answer #2 · answered by Jim Maryland 7 · 0⤊ 0⤋
Hi! as long as the chips fits the slots, you may place them in but there is not warranty that the PC can perform better, it may read them but since the configuration is for 1 GB, IT WON"T HURT but may not help either.
2007-03-16 03:32:49 · answer #3 · answered by Dont_do_that 2 · 0⤊ 0⤋
You can go as high as your BIOS will support.
That mean total memory.
If you install more than your BIOS will support then your BIOS probably won't allow your system to pass the memory check.
See if there is a BIOS update for your Mother Board.
2007-03-16 03:26:34 · answer #4 · answered by Jenli 3 · 0⤊ 0⤋
Upgrade your Bios, and see if there is a Difference, usually the Dells going from AO3 to AO9 have a big difference
2007-03-16 03:22:59 · answer #5 · answered by Mictlan_KISS 6 · 0⤊ 0⤋
YOu can remove the 512 and add 2 2gb
2007-03-16 03:28:44 · answer #6 · answered by jarrydhawley 1 · 0⤊ 1⤋
if it says the max is 1gb then if u put 2gb it will only recognize that 1gb. dont install the other 1gb safe some money.
2007-03-16 03:28:53 · answer #7 · answered by Simon 5 · 0⤊ 0⤋
You should follow the manufacturer's guidelines.
2007-03-16 03:22:44 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Hi. I would follow their instruction. Max is max.
2007-03-16 03:23:11 · answer #9 · answered by Cirric 7 · 1⤊ 0⤋
It will not recognize 1GB DIMMs. Sorry.
2007-03-16 03:22:43 · answer #10 · answered by richmofo 2 · 0⤊ 0⤋