pump is ok just wont pump take foot of put it back pumps works for a few
2007-03-15 16:31:38 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Boats & Boating
Need more info. What are you using to judge the waterpump output, if you are looking at the tattletale stream coming out of the back of the lower cowling there might be a piece of trash that is plugging the line. Is the motor overheating? What is the make and model of the motor?
2007-03-15 17:39:02 · answer #1 · answered by Anonymous · 0⤊ 0⤋
there's a gas pump on the factor of the engine, its approximately 50mm sq. with a plastic disguise hung on by using a knurled screw. The gas hoses bypass into it and out to the carbs. The pump has 2 neoprene diaphragms that want changing each and every so in many circumstances, you will get a service kit to overtake the pump. i visit function that if there became into something incorrect with the gas line it might the two leak or not bypass gas in any respect.
2016-12-18 14:56:31 · answer #2 · answered by bornhoft 4 · 0⤊ 0⤋
did you put the dot of "adhesive" on the "Keyway" to hold it from slipping out of place ? Are the pump plates worn around the impeller ? If you just replaced the Impeller and NOT the whole housing, and plates, that is NO GOOD, you must replace the whole unit.
2007-03-15 20:55:08 · answer #3 · answered by Anonymous · 0⤊ 0⤋
was the impeller you originally took out in one piece? if any pieces were missing you have to retrieve them or they will stop up a passage. also, just because the tell-tale isn't peeing doesn't mean the engine is not cooling. take the line loose and see if it's plugged. check the t-stat.
2007-03-16 01:19:47 · answer #4 · answered by Anonymous · 1⤊ 0⤋
the outlet pipe is the problem it is plugged. check to see if the plate is scored up.replace if it is.
2007-03-16 02:18:18 · answer #5 · answered by sky 2 · 0⤊ 0⤋
check carburetor
2007-03-15 16:37:26 · answer #6 · answered by just wandering 3 · 0⤊ 2⤋