2007-03-14 21:18:13 · 5 answers · asked by rudyvas744 1 in Cars & Transportation ➔ Car Makes ➔ Infiniti
Open your hood, look for your fuel rail and attached to that is four injectors. They will be above your intake manifold, next to your throttle cable.
2007-03-14 21:26:58 · answer #1 · answered by Anonymous · 0⤊ 0⤋
The G20 has a Nissan SR20 engine. There are 4 fuel injectors in plain sight on top of the engine. The fuel injectors spray fuel into the intake manifold. So they are in between the intake manifold and cylinder head connected to the fuel rail, and intake manifold. They also will each have a connection that connects them to the wiring harness.
2007-03-15 19:24:32 · answer #2 · answered by celica_122 2 · 0⤊ 0⤋
You probably have more than 1.You should be able to locate them by looking for the inlet fuel supply line (the on with the fuel filter connected to it under the car). When you locate that line under the hood, you should be able to to locate the fuel rail, it will look like a pipe.From rail you should see the injectors with a plug hooked to them. If this doesn't help, almost all the parts houses have acomponant locater guide that they will be more than happy to help you find what you are looking for. Good luck.
2007-03-14 21:38:08 · answer #3 · answered by howard s 2 · 0⤊ 0⤋
while is it occuring, do you have the engine engaged on "Key on Engine Off"? in case you vehicle would not start up then the lighting and horn... are the least of your concerns. If it does you would be able to desire to learn the fuse panel below the guidance column, and the main important relay container interior the engine compartment. in case you have a attempt easy or Volt-Meter attempt the fuses. in case you do not then replace them the two. The fuse could be blown in a region not seen to you. If the fuses are blown then you would desire to learn what brought about the fuses to blow. Fuses do not purely placed on out for no reason, and various are designed to permit a undeniable quantity of spikes. you would be able to would desire to take it to a professional in motor vehicle electric powered platforms. they're going to examine the wiring diagrams and hit upon the project by employing attempting out the circuit.
2016-12-19 05:45:59 · answer #4 · answered by michelson 4 · 0⤊ 0⤋
it depends on if it's port or throttle body injection
2007-03-14 21:23:39 · answer #5 · answered by Waylon V 3 · 0⤊ 1⤋