as in i have changed master, and wheel cyd., new brakes and all but and i bleed from the fartherest wheel away and work my self in . (The driver side front and rear passenger when bleed will shoot fluid in a stream no air there) (In the other hand the passenger front and driverside rear just dribbles out ) have bleed for 2 days now. And i change the calipers too.
2007-03-14 14:46:51 · 5 answers · asked by solid_ice_25 1 in Cars & Transportation ➔ Maintenance & Repairs
go to the mechanic
2007-03-14 14:51:05 · answer #1 · answered by wats good people 2 · 0⤊ 0⤋
i own a repair shop ,and what causes this is a bad proportioning valve on it,that will cause it to only have partial brakes,you probably will have to replace this one,when there splitting the brakes up like that means there bad,but its a fairly cheap part,and you can even get good used one from a junk yard for it,that's what i usually do,they,ll charge you around 15.00 bucks for a good used one,and that will fix it,but when you bleed them out again gravity bleed them it takes longer but it works a lot better ,good luck with it,i hope this helps.
2007-03-14 14:55:28 · answer #2 · answered by dodge man 7 · 0⤊ 0⤋
If they are shoe brakes, there is a self adjustment that happens when you back up and apply the brakes...do this a few times and see if they start grabbing
2007-03-14 14:56:49 · answer #3 · answered by Anonymous · 0⤊ 1⤋
it is possable that you have a pin hole in the brake line somewhare or a pin hole someplace else that is letting air in possably even the bleeder valve isn't seating properly
2007-03-14 14:57:10 · answer #4 · answered by R G 1 · 0⤊ 0⤋
splitter tube not working right looks like a t
2007-03-14 14:55:52 · answer #5 · answered by jacey 3 · 0⤊ 0⤋