I checked my System and it says that the Device (Lite-On LTN483S MAX) is working properly.
What do younk the problem is?
2007-03-14 06:55:17 · 8 answers · asked by Tyson 3 in Computers & Internet ➔ Hardware ➔ Desktops
Questions to ask :
- did it previously work correctly ?
- what changes (if any) were made on your PC between then & now ?
If these do not apply & it is a newly installed drive then try connecting it on a different IDE channel.
Sometimes certain devices will not perform properly on the same channel as other drives despite the fact that they are detected correctly by Windows.
- verify all Master/Slave jumper configurations
- try a cleaning kit for CD drives
- try booting with a Windows CD ... perhaps the issue is within the operating system itself...
Hope these suggestions are of some assistance.
regards,
Philip T
2007-03-14 07:03:25 · answer #1 · answered by Philip T 7 · 0⤊ 0⤋
Try to use other CD. If the CD can run mean the CD have some problem. If other CD cannot run also, pls reinstall the CD ROM driver. Try to plug out the cable and plug in back. Good Luck !! if still cannot pls change the New One!
2007-03-14 07:07:33 · answer #2 · answered by Alex 1 · 0⤊ 0⤋
attempt to stay with diverse CD. If the CD can run recommend the CD have some difficulty. If diverse CD should not be able to run also, pls reinstall the CD ROM reason stress. attempt to plug out the cable and plug in back. sturdy success !! if nonetheless should not be able to pls replace the nice and cozy One!
2016-12-02 00:08:28 · answer #3 · answered by thetford 3 · 0⤊ 0⤋
1. try wiping the cd a few times, usually it helps
2. Check what kind of cd is it? DVD type cd? Make sure your cd-rom can read dvd.
3, Your Cd might be corrupted.
or
Your cd is probably blank or the wrong side of the cd you put in .. hahaha dumb as
2007-03-14 07:05:11 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Try another disc...I've found some discs aren't recognized properly. I'd also check to make sure that it's not upside down...I've don't that with those blank bulk ones that are hard to differentiate between the writing side and the top.
If not try rebooting the computer....that's worked for me. You can also install an updated driver as something may have been updated (ie. microsoft) which made it incompatible.
Good luck
2007-03-14 07:08:03 · answer #5 · answered by Liz 2 · 0⤊ 0⤋
Laser might need some cleaning. Try cleaning it first, then if you have problems with it reading any sort of cd, then you may want to take it to a shop to get it checked out (or have a friend that knows about computers check it out, whichever is cheapest).
2007-03-14 07:03:47 · answer #6 · answered by Anonymous · 0⤊ 0⤋
The CD. Try another one.
2007-03-14 07:17:37 · answer #7 · answered by Anonymous · 0⤊ 0⤋
not big thing jus some wires may b loose or a cleanin disc should b put.
don try anythin home......ul screw it up more
take it 2a pro hell fix in a sec wont even charge a bomb....
2007-03-14 07:06:06 · answer #8 · answered by Rohan Kapadia 2 · 0⤊ 0⤋