2007-03-13 14:35:20 · 3 answers · asked by koma 6 in Cars & Transportation ➔ Maintenance & Repairs
On the 3.8, you need to remove the big plastic cover on top of the engine. This is held in place by the oil fill tube. Turn counter-clockwise to remove. The plastic cover should lift right off. Now you will see a plastic intake manifold with a rubber hose coming from it to the air cleaner box. On the opposite end of the intake manifold, there will be a sensor with a wiring harness coming from it. Disconnect the wiring harness. Do not attempt to remove that sensor as it could be damaged (learned this firsthand). Twist the sensor counter-clockwise and lift out. Be careful when you take it apart as there is a spring in there on top of the PCV valve. Using a set of needle nose pliers, pull the PCV valve out and replace.
2007-03-13 16:39:41 · answer #1 · answered by ? 6 · 0⤊ 0⤋
It's in the plastic upper intake manifold. On the passenger side, kind of a 1/8 inch turn twist lock, the valve sits right under.
2007-03-13 23:17:01 · answer #2 · answered by not 7 · 1⤊ 0⤋
it has to be on the valve cover, you might have to take the plastic covering on the engine off first to see it.
2007-03-13 21:39:09 · answer #3 · answered by mister ss 7 · 0⤊ 1⤋