when i start the ignition it turns over but will not catch and start. the battery is fully charged and it was recently fixed what do i do?
2007-03-13 06:46:30 · 4 answers · asked by mary's jane 1 in Cars & Transportation ➔ Motorcycles
bad starter, or bendix
2007-03-13 13:25:37 · answer #1 · answered by howdy doody 3 · 1⤊ 0⤋
if the starter is turning over but not engaging flywheel to turn motor over then remove the starter either the solenoid is not pushing the gear forward or the linkage is bound.
If you mean the engine is turning over but not strarting get an old spark plug lay on top of motor where it has a good ground put on one of your plug wires turn over and see if you have spark, if so then move on to gas filter, fuel pump or crack the fitting on the main header to injectors should see gas squirt out. After that either injectors aren't firing or timing is off
2007-03-13 06:55:51 · answer #2 · answered by Dennis G 5 · 0⤊ 2⤋
make sure u have all electrical connections tight to the battery...both hot and ground. this happened recently to my bike. i backed out, and retightened all battery connections, and verified they were all tight.
a loose plug wire can play hell with ya also.
2007-03-13 12:29:42 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Check the spark plugs.
Sport bikes will not run properly, or even at all, if the plugs are slightly fouled.
2007-03-13 07:49:56 · answer #4 · answered by guardrailjim 7 · 0⤊ 1⤋