How to fit the winshield nozzle...the current ones r not working (they spray in a diff angle).?

1 ⤊

How to fit the winshield nozzle...the current ones r not working (they spray in a diff angle).?

Ho do I unfit the old and fit the new. I m using Mits. Eclipse GT 03.
Thanks for answering...

2007-03-13 01:42:56 · 2 answers · asked by rohit r 2 in Cars & Transportation ➔ Maintenance & Repairs

2 answers

Take a pin (not Pen) and remove the hose on the inside of the hood, push the pin into the hole. (paperclip too big) this will dislodge any gunk in the nozzle then spray water in the nozzle from the hood side. this will wash out the goop.

If you are determined to replace then there should be a clip on the underside. Slide that off and the part will come off the top.

2007-03-13 01:56:06 · answer #1 · answered by Uncle Red 6 · 1⤊ 0⤋

if all they need is adjusted take a straight pin and put it in the nozzle hole and swivel it where u need it

2007-03-13 14:39:59 · answer #2 · answered by bobin35 3 · 0⤊ 0⤋