2007-03-12 16:11:11 · 4 answers · asked by fcbuckeye1 1 in Home & Garden ➔ Maintenance & Repairs
do i mess with the set screws on the spindle
2007-03-12 16:45:08 · update #1
the main trick is the bolts are opposite of most bolts (because of the touque of the spinning blades) so you remove them by turning Right instead of left.
2007-03-12 16:41:41 · answer #1 · answered by Anonymous · 0⤊ 0⤋
well, you should be able to remove the deck from the mower. you then just flip it over and take the bolts off of the blades. be carefull, they may be left handed. if you are sharpening them you will want to ensure that they are properly balanced before installing.
2007-03-12 16:19:02 · answer #2 · answered by cronos51101 5 · 0⤊ 0⤋
you do no longer ought to eliminate all the gasoline. in actuality, I only unplug the spark plug cable, and positioned saran wrap over the filler hollow then positioned the filler cap over the saran wrap to maintain the gasoline from leaking. I tip the mower to the choice edge of the gasoline filler hollow. This keeps the gasoline in the tank every time.
2016-11-24 23:44:10 · answer #3 · answered by ? 4 · 0⤊ 0⤋
Every mower we have serviced has been right handed threads. The thing is they might have used an impact wrench when putting them on. This will make it seam as though they are stuck.
2007-03-15 04:48:41 · answer #4 · answered by Todd B 5 · 0⤊ 0⤋