craftsman: where can i get parts for my craftsman motorcycle jack 950190?

Answer 1

go to sears.com
on the site there is a parts link - I think on the left 1/2 to 3/4 down the page.
sears/craftsmam carry parts for everything they have made that requires parts. enter your model number and they will show you the parts available.

Answer 2

Sears Motorcycle Jack

Answer 3

Sears Motorcycle Lift

Answer 4

This Site Might Help You.

RE:
craftsman: where can i get parts for my craftsman motorcycle jack 950190?

Answer 5

T F gave the correct answer. Sears/Craftsman sells repair parts for all of their products. I've bought a crankshaft for a Craftsman compressor. Piston & rings for a Craftsman lawn edger.

Answer 6

Seems most of them have that same issue and with mine I always put a wedge in the lift after I've raised it to where it needs to be. It's a safety thing I learned working on cars as a kid, never rely on a hydraulic jack and always use secure jack stands, same principal just smaller. If you'll notice there is a locking device located on the sides of the lift with a release bar that runs across just ahead of the jack, this can be used for short periods of time but for longer working durations it's safer to have a separate wedge securing it in an upright position and use tie-downs to secure the bike to the lift.

Answer 7

you may try a few things the jcwhitney or northern hydralic catalogs are great resources for hard to find parts and accesories or if you havent trie dthem already either the craftsman or sears websites

Answer 8

i would check sears.com first, then check any motorcycle salvage shops around your area. If you need common parts like levers and stuff you may be able to adapt something from a modern bike to work.

Answer 9

if it is out of warranty and it is the hydraulic pump sears will not repair they say its a safty issue buy a new one.