My 2000 Honda CR-V was hit by a mudflap from a truck. It hit the left front of my vehicle, leaving a dent in the hood and my left front turn signal to not work. Then, my left back turn signal stopped working as well. How do I fix the turn signals?
2007-03-11 12:33:32 · 6 answers · asked by J-mac 1 in Cars & Transportation ➔ Maintenance & Repairs
Replace the broken bulb up front and it should work.
2007-03-11 12:37:01 · answer #1 · answered by wheeler 5 · 0⤊ 0⤋
First try replacing the bulb on the front, sometimes when the one doesnt work, it will cause others not to work. Try that first. If that doesnt fix it, check the fuse box, if the fuse is blown, it could be a short in the wire, but replace the fuse first, if the lights work, there shouldnt be a short in the wire.
2007-03-11 19:40:14 · answer #2 · answered by ? 3 · 0⤊ 0⤋
You might try checking the fuse. And one more thing that is going to sound really stupid but it sometimes works, try turning your flashers on & off about 10 times. I had problems with my lights a while back, and tried turning the flashers on & off and for some strange reason (maybe it reset the computer?) it worked.
2007-03-11 19:42:43 · answer #3 · answered by Anonymous · 0⤊ 0⤋
one bad lamp will cause one side not to work. The front left lamp is most likely bad because of a hard hit to the body of the Honda. The filament is most likely broken(lamp).
2007-03-11 19:49:50 · answer #4 · answered by delbeglenda 2 · 0⤊ 0⤋
it could be that both your turn signals are out (coincedently) or it could be a relay gone bad that you would ahve to replace... my sugggestion is to replace the bulbs first (no more than $5) if not, it could be your relays
2007-03-11 19:39:58 · answer #5 · answered by Patrick M 2 · 0⤊ 0⤋
check your blinker fluid bwahaha
2007-03-11 22:52:05 · answer #6 · answered by Anonymous · 0⤊ 1⤋