How do I fix my lawnmower's wheel?

Question

The wheel of my lawnmower keeps falling off;it appears that the carriage bolt doesnt seem to grip the wheel.Can anyone help me with a solution?

Answer 1

Most lawnmowers have "body bolts" that have a larger diameter through the wheel to act as an axle and a smaller diameter in the threaded area to go through the mounting bracket. There should be a lock washer and nut or a lock nut on the threaded potion to draw the shoulder of the larger diameter portion tight to the bracket without pinching the wheel so it still turns freely.

Most wheels have a bushing to ride on the axle. If you have a high quality mower, the wheel may have a bearing assembly that is worn out. That would cause big time wheel wobble. Solution-replace the wheel.

It's near impossible to find these bolts at a hardware store. You can find them online or at a lawnmower shop. Do a web search for your mower brand & model and you can probably find a parts list if you don't have your manual.

Answer 2

Lawnmower Wheel

Answer 3

Drill a hole in the center of the wheel a little bigger than what is there. Get a brass bushing and insert it. Make sure the hole you drill will incorporate the outside diameter of the brass bushing. This will last a lot longer and also make the wheel a lot more stable. Then re-insert the carriage bolt, this should take care of your problem and the wheels will last a lot longer. The plastic wears out way to fast and this is an easy and very sturdy fix.

Answer 4

Mower repairs can take up a good portion of your summer lawn care time—a time that is supposed to be a strange, but healthy mix of sweat, relaxation and enjoyment. However, working on a mower that perpetually breaks down can take up months of your time—which in most cases is the entire mowing season.

Most often when a mower needs work, you’ll see the problem manifest itself in other areas. For example, if the spark plug needs replacing, you might assume that the engine isn’t getting gas or that something is wrong with the carburetor. When it comes down to the nitty-gritty, mowers don’t need repaired as much as they need maintained—and there lies the difference of a mower that sits idly or one that runs well for the entire season.

First and foremost, every time you are done mowing, the engine, blades and all should be thoroughly cleaned. Professionals might wait until the end of their day, but really should follow the same rules. The mower shouldn’t necessarily be cleaned with water (although I’ve seen people do it carefully and it seems to work), but scraping the underneath of the deck and using an air compressor to clean out the air-filter, carburetor and around the engine block and pulleys is an excellent way to maintain look and function.

Next, if you are attempting to diagnose a problem with your lawnmower engine, using deductive reasoning might do the trick. If you find out later that a problem is severe (for example, you ran over a tree stump and cracked the head) then it might be time to think about the worth of your investment should you opt to fix the mower. Newer mowers aren’t necessarily better, but might prove to save you a little more time and money in the long run.

If you are having troubles starting your engine (especially if you have to pull start it), you could find that the engine isn’t getting fuel (or that the fuel is no good or not properly mixed) and/or perhaps something is not working properly with the ignition (for example, the pull rope isn’t gripping or their isn’t enough power to turn over the engine, etc).

New, clean fuel is important. Be sure not to use old fuel, especially if you aren’t sure whether it has been mixed and/or stored properly. Dispense of the old gas and don’t store fuel from season to season. If the gas and oil is clean, the engine will be clean.

If you believe that the problem isn’t fuel related, make sure that you are getting the spark necessary to turn over the engine. Remove the outer rubber casing on the plug, and with a spark plug wrench, remove it carefully. Check to see if it is oily and grimy. If that’s the case, replace it (making sure that the gap distance on the end of the plug is correct—most are factory set, but check for backup). If the spark plug looks good, reattach the rubber outer casing and wire and set the end of the spark plug against the mower’s body. Pull or push start the mower and see if a nice, clear blue spark shoots out towards the metal frame. Don’t touch it, but if you see the spark, then that means the plug is firing and it should be OK to use. If not, replace it and check performance. The wire connecting the plug to the starter could be worn or cut and need replaced as well.

While all of this will help you get started, you can do the work yourself. It will simply take some investigative work and patience on your part. As stated, maintenance is most often the key to keeping your mower out of the repair shop and on your lawn from season to season.

Answer 5

Push Lawn Mower Wheels

Answer 6

Take the wheel and bolt to Lowes and get a new bolt and nut. They got all those parts there and there are people who can help you buy the exact needed thing.

Answer 7

If the specially designed bolt is still serviceable[ not worn-out or stripped threads], be sure the lock washer is in place, then torque the nut. If the problem persists, use a thread locker [blue or red Locktite], or replace nut with a new self locking nut [ny-lock, Stouver], or drill a small hole in bolt threads and/or nut. Then install a cotter pin or safety wire.

Answer 8

Get a new wheel and bolt.

Answer 9

you can buy replacement wheels and the bolts that mount them at any hardware store or big box home center.

Answer 10

Crazy glue