how to make the larger t-shirt to a smaller size like for instance how to braid the sides and everything?

Answer 1

What I do is make parallel cuts across the sides of the t-shirt, spacing them about 1/2 an inch to an inch apart. Then you cut down the middle of these strips, and tie them in knots. If you do this down both sides, and on the sleeves, the t-shirt becomes much smaller. Depending on how much skin you like to show, you can wear a tank top underneath so its not too much.

Answer 2

I've done this myself a few times.. lay the t-shirt flat and iron so u have a visible crease on each side evenly. Then cut each side along that line. Put the shirt on and pull the sides together until you have about an inch or however much needs to be brought in on both sides evenly then mark them somehow. Cut even strips and double knot them together and you've got it!! Hope this helps!

Answer 3

cut up the sides of the shirt, from the bottom hem to the armpit. then, cut parallel strips along the main cut. make sure they are long enough to tie together, but not too long, or the shirt will be too small. then, tie the two sides together in knots. voila! also, wear something underneath when you wear the shirt, or you might show a little too much.

Answer 4

those compressions are DVD ripped. you could continuously rip your 4.30 gb DVD to seven hundred Mb and nonetheless get a sturdy high quality. WINRAR and WINZIP would not help in any respect in this compression. they could compressed by skill of two to 4 mb lesser it is all. however the advantages with Winrar and Winzip is which you will injury the document to many aspects...... you could try to initiate you rip with nero.....Nero comes with ripping decision.

Answer 5

i'm trying 2 find out the same thing!

Answer 6

make the cut bigger so it ties in farther so its tighter

*Hope This Helps*
~~~Nat♥Luvr~~~