2007-03-10 09:26:18 · 6 answers · asked by B-RO 2 in Cars & Transportation ➔ Maintenance & Repairs
It is called a ridge reamer. This only used when you are rebuilding an engine. The average person does not have this tool. If used improperly, your buying a new engine.
2007-03-10 09:36:26 · answer #1 · answered by Lab 7 · 2⤊ 0⤋
Dry Lab's completely correct. It's for a complete engine rebuild only. There's on object in doing unless you plan on removing the rod caps and push the rods and pistons with the rings out of the block. If you arbitrarily do this and plan on leaving the pistons in all the trash and carbon build up will drop straight down into the top ring grooves. and you don't want to do this at any cost.
2007-03-10 12:03:16 · answer #2 · answered by Country Boy 7 · 0⤊ 0⤋
thats a ridge reamer.and when you trying to clean the grooves out of the pistons,use a broken ring.
2007-03-10 10:04:43 · answer #3 · answered by Anonymous · 0⤊ 0⤋
The back of a hacksaw blade and a bottle of Techron.
2007-03-10 10:33:04 · answer #4 · answered by Nomadd 7 · 0⤊ 0⤋
Above is correct, but if your careful you could simply use a scraper or a good knife.
2007-03-10 09:40:52 · answer #5 · answered by occluderx 4 · 0⤊ 1⤋
Another homework question.
2007-03-11 20:36:40 · answer #6 · answered by Arnon 6 · 0⤊ 0⤋