I replaced the pigtail on the Neutral Safety switch. Then I spliced the wires so at to match the old ones. The reverse(back up) lights worked for a couple of days then nothing. Where could the problem be?
2007-03-10 07:31:34 · 4 answers · asked by Dan M 2 in Cars & Transportation ➔ Maintenance & Repairs
Eather the bulbs or your wireing. Go back and check your wireing to be shure your connections dident come loose. If everything is ok, check the bulbs.
2007-03-10 07:36:50 · answer #1 · answered by goldwing127959 6 · 1⤊ 0⤋
Try the fuse! Or it is possible the reverse switch on the tranny is faulty.
2007-03-10 07:40:07 · answer #2 · answered by Anonymous · 0⤊ 0⤋
make sure there are no exposed wires where a short circuit could happen. a short would cause your fuse to blow, which would cause your lights not to work.
2007-03-10 09:01:37 · answer #3 · answered by tomatoehead 2 · 0⤊ 0⤋
change the reverse sending unit.
2007-03-10 10:54:42 · answer #4 · answered by Anonymous · 0⤊ 0⤋