The motherboard is Intel 865GBF motherboard and has 4 slots for RAM divided into 2 channels with 2 slots in each channel
2007-03-10 00:33:38 · 9 answers · asked by Kanishk T 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
That depends on your motherboard architecture! Its nice that you gave the model number but lets try something new today! If you have the mobo manual, read it! If you dont have it, you can download it for free from the mobo mfgs site.
NINJU , just because yours may doesnt mean they all do!
2007-03-10 00:36:31 · answer #1 · answered by Anonymous · 1⤊ 0⤋
I would go with identical pairs in each slot, but get the same speed. Having different speed RAM might work, but slow everything down. Here's your system:
System Specs
Type of system: Motherboards
Bus Architecture: PCI
CPU Type: Intel Pentium 4
Comments: 400/533/800MHz FSB, Intel 865G Chipset
System Memory
Standard Memory: 0 MB (removable)
Maximum Memory: 4.0 GB
Maximum Expansion: 4 sockets
Comments: PC2100/PC2700/PC3200 DDR SDRAM DIMMs. Supports Dual Channel DDR.
Check your system at http://www.coastmemory.com and try to get exactly what you have.
Good luck and Happy Computing!
2007-03-10 00:59:30 · answer #2 · answered by Anonymous · 1⤊ 0⤋
in all probability 4 simply by fact it says it is going to soak as much as eight gb's of ram. maximum sticks of ram basically go as much as two gigabytes a stick so there might in all probability be 4 slots. it says it comes with 3gb which could be plenty for gaming and whatnot. what are you making plans on doing with this computing gadget? i equipped my own computing gadget and basically used 2 gigs and it somewhat is a speedy one.
2016-10-18 00:44:56 · answer #3 · answered by ? 4 · 0⤊ 0⤋
it is possible to put different sizes of memory and speeds into the different slots, but not advised to do so....you generally want the same speed and type of memory to match.....basically so you do not cause damage to the other memeory....if what you install is at a slower speed then what is already there...the existing memory has to slow down to matchup and that could cause problems....or the new memory has to speed up and that could cause even more problems......matched memory is the best way to go....if its a difference of say like pc100 versus pc133 or something similar, since the speeds are so close to each other it would be possible to mix and match but overall you wouldn't gain anything.
2007-03-10 00:38:44 · answer #4 · answered by Helping Since 1969 6 · 0⤊ 0⤋
Yes
2007-03-10 00:40:53 · answer #5 · answered by Can music save your mortal soul? 5 · 0⤊ 0⤋
look first you need to know if the four slots is for the same type of ram you can till by looking on them for example the dd ram have one separator but SD ram have tow so if they all four same you can.
2007-03-10 00:48:18 · answer #6 · answered by Sammour 1 · 0⤊ 0⤋
sure. your system will ratchet down the RAM speed to the slowest you have installed. by mixing, you also won't get the benefits from "dual channel" mode (if your mobo supports this)
2007-03-10 00:50:53 · answer #7 · answered by Anonymous · 0⤊ 0⤋
Yes you can very well do it.The system adjusts.
2007-03-10 00:35:22 · answer #8 · answered by Anonymous · 0⤊ 0⤋
I would not advise
Dornessa
http://onlinedownlinebuilders.com
2007-03-10 00:40:26 · answer #9 · answered by Anonymous · 0⤊ 0⤋