how do you get the dash board out in a 99 vectra?

Answer 1

first of all take the steering cowl off, then pull out the headlight switch on the right hand side, then take out the heater vent above the switch and the other two vents above the centre console. you should then be able to see screws to take the grey console panels around the instrument panel off.

Around the steering column there is a rubber 'yolk' held on by two screws right close to the wiring of the steering column each side, undo those take the yolk of and you should be able to take the right hand side fascia off. there is a small clip on the left hand fascia that lifts up and again you should be able to take that off.

There are four screws that hold the instrument panel on, once removed make sure you pull the socket off the multi info display (the one with the date/time on it), and then pull the instrument panel out towards you and then out towards the passenger side door, take care not to break the bottom screw fixings on the instrument panel.

That should do it and just reverse everything to put it all back together!

Answer 2

I'm not sure but I guess you could always look around the edges for screws