English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i would like to transfer document from old to new cpu

2007-03-08 18:55:19 · 7 answers · asked by Val & JuJu 1 in Computers & Internet Hardware Other - Hardware

7 answers

If you have NIC (Network Interface Card) in both pc, then all you need is CAT5 cross over cable, cheaper and hussle free.

2007-03-08 19:54:30 · answer #1 · answered by Anonymous · 0 0

The second answer is pretty good.

The CPU is a small square removable chip found on every motherboard inside your case that many never even see, as of why many people call their tower, case or PC a CPU is unknown to me but sure is quite annoying.

2007-03-09 03:09:33 · answer #2 · answered by INOA 7 · 1 0

You can use floppy or a usb pen drive or burn a cd to transfer your document floppys get easily corrupted so if you have usb pen drive well enough to transfer documents they come in all sizes from 128 mb to 2 gb so depending upon your requirement you can use them or You can even use a dvd to transfer document .

2007-03-09 03:00:56 · answer #3 · answered by parth.bakshi 1 · 0 0

There are 2 easy ways to doing this.

1 - Get a wireless network and sharefiles
2 - get a flash drive.

I have both actually, and wireless network with File Sharing is much easier.

2007-03-09 03:24:42 · answer #4 · answered by Jeremy Medlock 5 · 0 0

well im guess you mean from 1 computer to another
there is mutli ways, floppy disk, cdrw, dvd usb pen drive, external hard drive, just taking out the hard drive and connecting it to the other, using a crossover cable and setting up a network. or email the file to yourself connect to the internet and download it.

2007-03-09 03:00:19 · answer #5 · answered by Paultech 7 · 0 0

u mean PC to PC...
USB Drive,
USB Network
LAN Network
CD Burner
DVD Burner
Floppy Drive.
Serial Port
Parallel Port.
Hand Write it again....
Upload to Internet and Download From Other.

2007-03-09 03:00:30 · answer #6 · answered by easyasweb.com 2 · 0 0

connect the CPUs by some bus , write some assembly code to put data on the bus and receive data from bus

2007-03-09 03:43:16 · answer #7 · answered by Anonymous · 0 0

fedest.com, questions and answers