This sounds like a homework question. Re-read the chapter and try answering the question on your own.
2007-03-08 13:49:46
·
answer #1
·
answered by Anonymous
·
0⤊
2⤋
You don't say WHAT kind of router so I can't be too specific but the contents of a routing table are pretty universal. Basically you will have a number of IP prefixes, along with reachability information, or the next hop, for each one. This may consist of a physical interface or another host or router that may have knowledge of how to reach a network.
Routing tables can be populated dynamically by routing protocols (EIGRP, BGP, OSPF, RIP, etc) or by preconfigured static routing statements. You may also learn or configure a default route, which allows traffic to be forwarded to a destination even if it hasn't be learned or statically defined.
Read up about routing basics here:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/routing.htm
It's from Cisco but it does apply to IPv4 routing in general.
2007-03-08 15:06:58
·
answer #2
·
answered by partygrl319 3
·
0⤊
0⤋
IPs and subnets from the network that has been configured on the router and the routers connected to it along with routing/routed protocols.
2007-03-08 13:53:48
·
answer #3
·
answered by Big Q 5
·
0⤊
0⤋